Setting Up a Computer for Printing
4-3
Using a NetBIOS Network (Windows 95/98/Me)
4
Setting Up a Computer for Printing
After you have connected the network cable, you are ready to set up each
computer on your network for printing.
Connecting to a NetBIOS Network
All computers that use the printer must have NetBEUI Client software installed, and
must be enabled for use on a NetBIOS network. To check whether NetBEUI Client
software is installed, follow the procedure below.
1
Right click the [Network Neighborhood] icon on the computer
screen ➞ click [Properties].
2
Check that [NetBEUI] is in [The following network
components are installed].
If NetBEUI is not installed, click [Add] to install NetBEUI Client software.
