Settings Options 159
E-EQ-MX6RG-E-ARC MX6 Reference Guide
Authentication Properties tab
Authentication
Algorithm
Automatic based on WEP settings is the default.
802.1X Default is Disabled.
Encryption tab
WEP Parameters
Configure the WEP Key for secure wireless communication. The default is Disabled.
Method Select one of the five options from the pull down list:
Disabled WEP Key Off
64 bit (HEX) up to 10 characters configurable in Hexadecimal for
Encryption Key
64 bit (ASCII) up to 5 characters configurable in ASCII for
Encryption Key
128 bit (HEX) up to 26 characters configurable in Hexadecimal for
Encryption Key
128 bit (ASCII) up to 13 characters configurable in ASCII for
Encryption Key
Note: HEX, Hexadecimal number set of 16 digits from 0-9 and from
A(a)-F(f). ASCII: Any printable ASCII character.
Key ID Choose from the available options:
Key 1 (Default)
Key 2
Key 3
Key 4
Encryption Key Different character set depending on different WEP method and key
format.
Tap OK to make the changes, close this screen and save the changes. Tap Cancel to ignore all
changes made on this screen.
Tap the Network Settings tab to set AP Search Threshold. LXE recommends setting this value to
either Medium or High Density. Low Density is the default.
