Power Tools EZConfig Utilities 173
E-EQ-MX6RG-E-ARC MX6 Reference Guide
Autorun
Access: Start | Power Tools | EZConfig Utilities
Autorun is divided into two separate functions – Autorun and Autoinstall.
See section titled “Using the EZConfig Editor” for details and instruction when working with the
sections and keys in the Autorun configuration file.
Double-tap the Autorun configuration file to open it.
OR
Double-tap EZConfig Editor to open the editor, tap File | Open and select the Autorun
configuration file from the selection box.
When additions/changes are finished, tap File | Save or File | Save As.
Autorun
Autorun specifies the software applications to launch after each hard reset. Autorun is located in
the \IPSM folder and consists of an Autorun.exe that is programmed by the Autorun
Configuration File.
During startup, after a soft or hard reset, the operating system looks for and launches
\IPSM\Autorun.exe. If the Autorun.exe is configured (by Autorun.EXM) to launch an
application, that application launches when Autorun.exe launches. Autorun can launch up to 32
applications or utility programs after each hard reset.
Note: The Autorun.EXM file allows applications to be launched based on conditional
situations, including the return code of another application launched previously and
specific characteristics of the mobile device itself.
Autorun Configuration File
The Autorun.EXM file has a multi-level tree structure. There are two top levels: Settings which
stores general Autorun settings and Programs, which determines which programs to launch. The
Programs section has multiple child sections.
Settings Section
Settings store general Autorun settings.
Key Function Available Values
Version Stores the .EXM file version.
Default: 22
You cannot modify this
value!
ByPassKey Defines the key that can be pressed to bypass
Autorun
Default: 42=SCAN key
Debug Controls the debug function at AutoInstall.
Default: 0
0=Disable
1=Enable, an autorun.log
file is created in the
\IPSM folder.
