E-EQ-MX6RG-E-ARC MX6 Reference Guide
Chapter 6 Scanner/Imager Parameter Setup
Introduction
See Also: Section titled “Sample SCANCONFIG.INI File”.
• Note that settings indicated by a * have an effect only on MX6 units equipped with an
imager. These settings have no effect on laser scanner-equipped units.
• Symbologies indicated by a * can only be decoded by imager-equipped units. Altering
their settings has no effect on units equipped with a laser scanner.
After configuration is complete, save the modified scanner configuration file and perform a soft
reset (press and hold SFT + CTRL) in order for the new settings to take effect.
See Also: “Scandemo” in Power Tools EZConfig Utilities.
Identification
Read all cautions and warnings on the labels on the MX6. Do not touch the Scan button on the
MX6 or the trigger on the handle while determining whether the MX6 has a laser scanner or an
integrated imager.
Laser Scanner Integrated Imager
Figure 6-1 Laser Scanner / Imager Aperture
