A SERVICE OF

logo

Configuring an MX6 Radio for WPA 267
E-EQ-MX6RG-E-ARC MX6 Reference Guide
Configure Radio Profile WPA
Settings
Figure 7-8 Set the WPA Mode
At the bottom of the screen choose the WPA Settings tab and set the WPA Mode to WPA 802.1X.
Tap OK.
The user radio is now configured and authenticated.
Figure 7-9 WPA PSK Mode Radio is Authenticated
Add Server
Authentication/Validation to User
Profile
At the bottom of the screen choose the Server tab. The Server identity page allows you to set the
credentials used for validating the authentication server during TLS and PEAP message exchange.