Video Protocols and Resolution Configuration for CP Conferencing
Polycom®, Inc. 118
Resolution Configuration - Basic
The Resolution Configuration basic dialog box contains the following panes:
● Max CP Resolution Pane
● Resolution Configuration Pane
Maximum CP Resolution Pane
The Collaboration Server can be set to one of the following Maximum CP Resolutions:
● HD 1080p60
● HD 1080p30
● HD 720p30
● SD 30
● CIF 30
Limiting Maximum Resolution
Before a selection is made in this pane, the Maximum CP Resolution of the system is determined by the
MAX_CP_RESOLUTION System Flag.
The MAX_CP_RESOLUTION flag value is applied to the system during First Time Power-on and after a
system upgrade.
The default flag value is HD1080 setting the Maximum CP Resolution value in the Resolution
Configuration dialog box to 1080p60.
All subsequent changes to the Maximum CP Resolution of the system are made by selections in this pane.
The Maximum Resolution can further be limited per conference or per participant endpoint.
The Maximum Conference Resolution, can be limited via the Profile - Video Quality dialog box. For more
information see New AVC CP Profile - Video Quality Parameters and New SVC Profile - Video Quality
Parameters.
The Maximum Resolution can further be limited per participant endpoint via the Participant - Properties
dialog box. For more information see New Participant - Advanced.
Resolution Configuration Pane
The user can select from 3 pre-defined Resolution Configurations or select a manual Resolution Slider
adjustment mode. The pre-defined settings can be accepted without modification or be used as the basis
for manual fine tuning of resolution settings by the administrator.
The Manual radio button is automatically selected if any changes are made to the Resolution Sliders.
