Storing the Remote ID
As a new machine has a Remote ID of 0000 when it leaves the factory, we
recommend that you store a new Remote ID immediately.
1. Function 6 0 2 2 2 2
6 1 then ↓ until the screen is as
shown opposite.
2. Yes
3. Input the Remote ID that you will be us -
ing. Example: 6 7 5 4
4. Yes Function
Switching Transfer Request by Tonal Signals On/Off
To switch this feature on or off, do the following. (See page 10 for more
information about the User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 9 1
2. The settings for switch 00 are now
shown on the bottom line of the display.
3. Press ↓ until the settings for switch 03
are shown.
The setting you need to use is digit 2.
4. If you wish to change the setting, press 2 .
5. Finish: Yes Function
REMOTE ID
YES
TO SET PREVIOUS
NO
TO CANCEL NEXT
REMOTE ID
ID SETTING
0000
YES
TO END
_
REMOTE ID
YES
OR
CLR
.
NO
6754
USER PARAMETER PRINT LIST
DEFAULT: 01000000
SWITCH00: 01000000
YES
TO END
Digit 2
0: The feature is disabled.
1: The feature is enabled.
ADVANCED FEATURES NETWORKING
95
