6. Clean the separation roller [E] with
the soft damp cloth, while rotating
the roller. This roller is near the
➀
decal inside the machine.
7. Clean the white strip [F] with the soft
damp cloth.
CAUTION:
Do not damage the sensor actuator
[G] (black plastic) below the white strip.
8. Clean the R1 and R2 rollers [H] with
the soft damp cloth. To rotate the
rollers, gently hold the cloth down on
the rollers and turn the main power
switch on. The rollers will rotate
once. These rollers are near the
➂
decal inside the machine.
[E]
[F]
[G]
[H]
USER MAINTENANCE PROCEDURES LOOKING AFTER THE MACHINE
206
