Sending to Just One Location
1. Make sure that the machine is in standby mode:
❐ The display on the operation panel must
be as shown on the right.
2. Carefully place your fax message into
the auto document feeder.
MEMORY TRANS. APR. 4. 12:25PM
SET DOCUMENT
MEMORY 100%
MEMORY TRANS. OPTIONS
ENTER FAX NUMBER
_
❐ To dial without placing the message in the
feeder first, see Direct Fax Number Entry on
page 68.
❐ If you only wish to scan a part of the
document, use the Specified Image Area
feature. See page 118 for details.
❐ The pages must be placed face down in the
feeder, with the first page at the bottom of the
stack.
❐ Feed the pages in so that the top edge goes in
first.
❐ Do not feed in more than 50 pages.
❐ Do not use unsuitable types of original (see
pages 45 and 46).
❐ Adjust the document guides to fit the width of
the pages.
❐ Do not use pages of different sizes.
❐ The pages should be arranged loosely,
but the leading edges should be tidy, as
shown above.
Selecting Contrast and Resolution: See page 54.
Options for Sending a Message: See page 59.
Scanning only a part of the document (Specified Image Area): See page 118.
ROUTINE OPERATION SENDING A FAX MESSAGE
49
