RDS (Remote Diagnostic System)
Overview
If your machine has a problem, a service technician can perform various
diagnostic tasks over the telephone line from the service station to try to find out
what is wrong with your machine. The service technician can also use RDS to
change some of your machine’s settings if you request it.
For RDS to work, you must switch it on before the service technician starts the
RDS operation on your machine.
For some RDS operations, it may be necessary to you to stay near the machine.
Switching RDS On/Off
Before your machine can accept incoming calls from an RDS, you have to switch
RDS on using Function 81. If it is switched off, the machine will not accept
treatment from an RDS.
1. Function 6 0 2 2 2 2 8 1
2. Scroll through the list of features with ↑ and ↓ until RDS appears.
3. Change the on/off setting by pressing ← or → .
4. Finish: Yes Function
PSTN LINE TYPE SELECT
DP TT
YES
TO END
ADVANCED FEATURES OTHER
183
