Secure Transmission
Overview
This feature allows some degree of data security when sending a fax message.
However, care should be taken because the method used for data encryption is
quite simple, unlike the methods used in data scramblers or in the DES (Data
Encryption Standard) used in some software packages.
The transmitting machine will encrypt the data, and the receiving machine will
recover the original data form the encrypted signal before printing.
The ID code for Secure Transmission is fixed. When sending a fax message by
Secure Transmission, the supplier is not responsible for the interception or
decoding of the message by an unauthorized party.
Before using this feature, you must program one of the User Function Keys to
activate this feature (Function 35; see page 163).
Changing the Secure Transmission on/off Home Position Setting
To change the Secure Transmission on/off home position setting, do the following
procedure. (See page 10 if you need more information about the User Para meter
settings adjustment procedure).
1. Function 6 0 2 2 2 2 9 1
2. The settings for switch 00 are now
shown on the bottom line of the display.
3. Press ↓ until the settings for switch 03
are shown.
The setting that you need to change is
digit 3.
4. If you wish to change the setting, press 3 .
5. Finish: Yes Function
USER PARAMETER PRINT LIST
DEFAULT: 01000000
SWITCH00: 01000000
YES
TO END
Digit 3
0: The home position is "Off". If
you use Secure Transmission, it
will be automatically disabled after
the transmission.
1: The home position is "On". If
you use Secure Transmission, it
will stay enabled after the end of
the transmission (the light under
the User Function Key will stay on).
ADVANCED FEATURES TRANSMISSION
117
