5. Yes
6. Either
❐ Dial another number: Go to step 4.
❐ Press
Start .
The machine will dial the first destination (or, if you selected Send Later, it will
return to standby mode and the fax message will be sent at the time that you
selected).
NOTE: In theory, you can send the same fax message to up to 200 different
destinations using the above procedure. However, this number
depends on how many numbers are currently waiting in memory to be
dialed. See the table on page 43 for more information concerning the
limitations to this feature.
Check your Destinations Before Dialing
If you wish to send a fax message to more than one location, you can scroll
through the list of telephone numbers that you have input so far to check whether
you have missed any out or entered any wrong numbers.
This feature is useful when using features such as Broadcasting, Transfer
Request, and Polling Reception.
Cross-reference
Broadcasting: see page 51. Transfer Request: see page 87.
Polling Reception: see page 158.
1. Press ↓ 0 8
2. Use the ↓ arrow to scroll through the list of destinations that you have
already input.
❐ To cancel a destination that you have input by mistake:
No
❐ To finish checking: Yes
MEMORY TRANS. OPTIONS
ENTER NO. OR
START
DEST: 2
Here, DEST: 2 indicates that the machine is
asking you to input the second telephone
number in your list of destinations for this fax
message.
_
STORING MEMORY 99%
PAGE 1
FILE NO. 0056
CHECK DEST. PRESS
YES
OR
NO
01 XYZ CO. NEW YORK
DEST.: 2
❐ The number after DEST shows how
many numbers you have input so far.
SENDING A FAX MESSAGE ROUTINE OPERATION
52
