Filter
Top Products
Chapter 7: How Tos
70
7.2 Capture Audio
Step 1. Launch the program and click "Capture" at the top of the
screen to go to the Capture module.
Step 2. Click the Audio tab. Select to record audio from a CD or
from a recording device.
If recording from a CD, select the track and then use the playback
controls to jump to the spot where you would like to begin
recording.
If recording from a recording device, select the device from the
pull-down. Click the Format button to select the bit rate and other
audio settings.
Step 3. Click the big red Record button beneath the preview
window. You'll be prompted to define the specifics of the file you
are about to capture:
- Choose the file name and save location.
- Optionally, check the box to add your captured file to an
album. If you plan on doing any type of editing, your file
will need to be in an album. See Section 3.3 for more
information on albums.
Step 4. When you are finished recording, click Stop. You can
listen to your captured file by clicking the Playback button.
For more information on capturing audio, see Section 2.2.