Filter
Top Products
Chapter 1. Introduction
3
Requirements
The following equipment is required for a complete VS482 installation:
Source Device
HDMI Type A output connector(s)
Note: A DVI/HDMI adapter is required when connecting a DVI source
device.
Display Device
Up to 2 display devices or receivers with an HDMI Type A input
connector
Cables
4 HDMI cables
Note: 1. No cables are included in this package. We strongly recommend that
you purchase high-quality cables of appropriate length since this will
affect the quality of the audio and video display. Contact your dealer
to purchase the correct cable sets.
2. If you wish to utilize the VS482’s high-end serial controller function,
you will also need to purchase an appropriate RS-232 cable.
See Installing the RS-232 Controller, page 10.