Filter
Top Products
VS482 User Manual
12
Switch Mode
You can choose how the VS482 behaves when a new input source is connected.
There are three Switch Modes as follows:
Default – The switch behaves normally without automatic switching
operation.
Next – Switch priority is placed on the next port that has a new source
connected to it (default).
Auto – Places priority on a selected port so that when a source is
connected to the said port, the VS482 automatically switches to it, and
the port can not be changed until the source is unplugged or auto
switching is disabled.
In addition, the Go To function, which can be turned On or Off via RS-232
commands, enables the VS482 to switch to the next port with a powered on
source device when the current input source is off.
Refer to Switch Mode Commands, page 18 for more details.