Filter
Top Products
VS482 User Manual
20
EDID Commands
Extended Display Identification Data (EDID) is a data format that contains a
display's basic information and is used to communicate with the video source/
system. You can set up which EDID mode the VS482 uses with the following
command:
EDID Command + Control (port1 / auto / default) [Enter]
For example, to use the Port1 EDID setting, type the following:
edid port1 [enter]
The following tables show the possible values and formats for the Control
command:
The following table shows the available command list:
Command Description
edid Enable EDID selection
Control Description
port1 Implement the EDID of the
connected display to Port 1, and
pass it to the video source
auto Implement the EDID of all
connected displays. The VS482
uses the best resolution for all
displays (default).
default Implements ATEN’s default
EDID
Command Control Enter Description
edid port1 [Enter] The EDID from Port 1 is passed to the
video source
edid auto [Enter] The VS482 implements the EDID of all
connected displays and uses the best
resolution for all displays (default)
edid default [Enter] ATEN’s default EDID is passed to the
video source