VS482 User Manual
30
OSD Setting
Use this screen to configure the VS482 OSD settings.
1. Use the drop-down menu to select which display mode the VS482 uses to
display information in the upper left corner of the screen. Options are as
follows.
Channel - This shows the source port number.
Full - This shows the source port number and source type. See Input
Setting Menu, page 28 for the list of source types.
Off - There is no information shown.
2. Select the visibility of the OSD menu when it is invoked. Press the menu
button to enter the adjustment menu. Press the up/down button to select
increase/decrease the value then press the setup button to adjust. The value
100 shows a fully visible and opaque OSD menu. The default value is 75.
Note: The Transparency value must be divisible by 5 (i.e., 5, 10, 15, 20...
and so on).