ATEN Technology 4-port dual hdmi switch TV Cables User Manual


 
Chapter 1. Introduction
5
Rear View
No. Component Description
1 Grounding Terminal The grounding wire (used to ground the unit) attaches
here.
Note: The grounding wire is not included in this
package. Contact your dealer for more information.
2 Power Jack The power adapter cable plugs in here.
3 IR Extender Port Connect the IR Extender to this port.
Note: The additional IR receiver can be purchased
separately.
4 RS-232 Serial Port This is the serial remote port for input source selection
and high-end system control, including firmware
upgrade.
5 Stereo Audio Ports The red port is for the right audio channel, and the
white port is for the left audio channel.
6 Digital Audio Ports Connect the optical and coaxial audio cables to these
ports.
7 HDMI Out (port 2) The cable from the HDMI display or receiver device
plugs in here.
8 HDMI Out (port 1)
(ARC In)
The cable from the HDMI display device or receiver
plugs in here.
Connect the ARC audio input connector or receiver
to this port. The ARC audio can be transmitted back
(to audio receivers) through this connectivity
9 HDMI In The cables from the HDMI source devices can plug
into any of four available ports.
5
4
2
8
9
1
6
3
7