Filter
Top Products
Chapter 3. Operation
15
RS-232 Serial Interface
The VS482’s built-in bi-directional RS-232 serial interface allows system
control through a high-end controller, PC, and/or home automation / home
theater software package.
Configuring the Serial Port
The controller’s serial port should be configured as follows:
Standby/Power Commands
The Standby/Power feature enables the VS482 to enter power saving mode.
The formula for Standby/Power commands is as follows:
Standby + Control command [Enter]
For example, to disable the Standby/Power feature, input the following:
standby off [Enter]
The following tables show the possible values for the Control string
:
The following table shows the available command list:
Baud Rate 19200
Data Bits 8
Parity None
Stop Bits 1
Flow Control None
Command Description
standby Standby/Power command
Control Description
on Turn on power saving mode
off Turn off power saving mode
Command Control Enter Description
standby on [Enter] Power saving mode on
standby off [Enter] Power saving mode off