Filter
Top Products
10
TV with Motorised System (DiSEqC 1.2)
Connect one end of RCA/Cinch cable to the RCA/Cinch socket on the back of
the STB and the other end to a RCA/Cinch socket on your TV.
If your TV doesn’t have a RCA/Cinch socket, connect one end of RF cable to
the RF OUT on the back of the STB and the other end to a RF input socket
on your TV.
Connect one end of your coaxial cable to the LNB IN connector on the STB and
the other end to the REC or Receiver connector on the DiSEqC 1.2 motor.
Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC
1.2 motor.
Set-up 4
STB Connection