Filter
Top Products
4
A/V & Data In/Out
VIDEO : RCA/Cinch
Video Output(CVBS)
AUDIO R/L : Cinch volume and Mute Control
(Resolution : 20bit DAC, max 2 Vrms)
RS232C : Transfer rate 115,200 bps
9 pin D-sub Type
RF-Modulator
RF-Connector : 75 , IEC 169-2, Male/Female
Frequency : 470MHz to 860MHz
Output Channel : CH21-69 or CH 28-69 or CH13-62
for the Remodulator
TV Standard : PAL B/G/I selectable by Menu
Preset Channel : CH36(or TBD).
Software changeable by Menu
Test Pattern : Vertical Black/White Bars
Power Supply
Input Voltage : 190 to 250V AC, 50/60 Hz
Type : SMPS
Power Consumption : Max. 30W
Standby Power : 8W
Protection : Seperate internal fuse.
The input shall have lightning Protection
Physical Specification
Size (W x H x D) : 260 x 50 x 180 mm
Weight (Net) : Around 1.3 Kg
Operating Temp : 0˚C to +45˚C
Storage Temp : -10˚C to +70˚C
Storage Humidity : 5% ~ 95% RH(Non-Condensing)
You can use a special antenna switch
with DiSEqC commands.
When changing channel from ASTRA
to EUTELSAT for example, a DiSEqC
command is sent with the 22KHz tone
through the antenna cable.
The antenna switch will change from
using ASTRA to EUTELSAT.
The concept of DiSEqC is a protective
trademark of EUTELSAT.
Data rate decides the picture quality of
digital TV programmes.
Date rate of about 5-6 Mbit/s coincides
with the picture quality of a
analog TV programme.
Specification
Please note : The specification of the STB may be changed without notice in advance.