Filter
Top Products
Trouble
Shooting Guide
39
Service Search
Problem Solution
"No Signal" in manual search
Check the "Signal Strength" and the "Signal Quality" in the
Signal Status menu.
Check the LNB - replace LNB if necessary.
Check the cable from the LNB.
Check the position of the dish - relign dish if necessary.
DiSEqC 1.0
Check that you have connected the LNBs to the correct
connections on the switch.
Check that you have set the correct settings in the Antenna
Setting menu.
DiSEqC 1.2
Check that you have selected this in the Antenna Setting
menu.
Check that the dish is aimed at the correct satellite.
Amber only
: Invalid system ID
Check wheather the system ID is different for Software and
STB.
Amber & Red
: Incorrect data block CRC
error
You need to contact your retail shop.
Amber & Red & Green
: Incorrect application CRC
error
You need to contact your retail shop.
LED Error Message
* If you can’t solve the problem even after referring this Trouble Shooting Guide,
contact us via our homepage.
Homepage : http://www.humax.co.kr