Bosch Appliances DVR-8K DVR User Manual


 
Digital Video Recorder Introduction | en 15
Bosch Security Systems User Manual F01U | 2.0 | 2008.12
ENTER: Confi rms menu selections or go to full screen of a selected camera in multiscreen.
Pressing this key again to return from full screen to multiscreen.
COPY: Copies the recorded data to an external device.
SEARCH: Displays the search menu.
MARK: Sets the mark point for recording search. You can set the mark point during the single
channel playback of recorded data.
PAUSE (X): Pauses playback.
STOP(x): Stops playback.
REC (z): Starts or stops recording.
m / c: Reverse search; Searches the recorded images in reverse sequence.
bB: Playback or reverse playback of recorded images.
M / C: Forward search; Searches the recorded images in forward sequence.
Number Buttons (0, 1-9): To select the PTZ preset number, ID, or channel.
INFO: Displays or removes the system information window.
LOG: Displays or removes the System Log List window.
PTZ: Switches this unit to PTZ mode to control the connected PTZ camera.
TOUR: Tours all registered preset positions in the PTZ camera.
ZOOM + / -: Adjusts the zoom level of the PTZ camera.
FOCUS + / -: Adjusts the focus of the PTZ camera.
IRIS + / -: Adjusts the iris of the PTZ camera.
PRESET
- SET: Registers the PTZ camera’s preset positions.
- CLEAR: Deletes a memorized preset position.
- MOVE: Moves the camera to the preset position.
ID: Set the appropriate DVR system ID to operate via the IR Remote Controller when using
multiple DVRs. Press the ID button, then press the number button within 2 seconds to select
the system ID of the DVR. If you set the system ID to “0”, you can control multiple DVR at the
same time.