Filter
Top Products
Digital Video Recorder Control Center | en 91
Bosch Security Systems User Manual F01U | 2.0 | 2008.12
Note:
The preset range is available from 0 to 255 on this unit. However the actual
preset range differs depending on the PTZ cameras.
Changing to a picture in a preset position
The following function is available only with cameras equipped with the preset function.
The preset function makes the PTZ camera move to the programmed preset position.
It is necessary to program preset positions for the PTZ camera beforehand.
1. Click the [MOVE] icon.
2. Use number icons to enter the memorized preset position’s index number, Click the
icon.
The camera moves to the preset position and the picture from the camera in that position
appears on the monitor.
To clear the preset position
You can delete a memorized preset position.
1. Click the [CLEAR] icon.
2. Use number icons to enter the memorized preset index number, Click the
icon.
The preset position will be deleted.
To tour the preset positions
You can tour all preset positions.
1. Click the [TOUR] icon.
All registered preset positions in the camera will be selected and the camera position image
will be switched on to the active window.
2. You can stop the tour by clicking the [TOUR] icon.
Setup for PTZ camera
You can change the setting of PTZ camera using each item in the menu.
1. Click the [SETUP] icon.
SETUP MENU appears in the windows.
2. Use the arrow and
icons to set the options.
Note:
Refer to the manuals of the PTZ camera for more details.