Bosch Appliances DVR-8K DVR User Manual


 
Digital Video Recorder Safety | en 5
Bosch Security Systems User Manual F01U | 2.0 | 2008.12
All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at least
3 mm in each pole, into the electrical installation of the building. If it is needed to open the hous-
ing for servicing and/or other activities, use this all-pole switch as the main disconnect device for
switching off the voltage to the unit.
Battery replacement - A lithium battery is located inside the unit enclosure. To avoid danger of
explosion, replace the battery as per instructions. Replace only with the same or equivalent type rec-
ommended by the manufacturer. Dispose of the replaced battery in an environmentally friendly way.
Refer all servicing to qualified service personnel.
CAUTION!
Class I Laser Product
Invisible laser radiation when open. Avoid exposure to beam.
This warning is applicable only to those models that contain an internal DVD burner which uses a
certified Class I laser.
Coax grounding:
Ground the cable system if connecting an outside cable system to the unit.
Connect outdoor equipment to the unit’s inputs only after this unit has had its grounding
plug connected to a grounded outlet or its ground terminal is properly connected to a ground
source.
Disconnect the unit’s input connectors from outdoor equipment before disconnecting the
grounding plug or grounding terminal.
Follow proper safety precautions such as grounding for any outdoor device connected to this
unit.
U.S.A. models only - Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides informa-
tion regarding proper grounding of the mount and supporting structure, grounding of the coax to
a discharge unit, size of grounding conductors, location of discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
NOTICE!
This device is intended for use in public areas only.
U.S. federal law strictly prohibits surreptitious recording of oral
communications.
Disposal - Your Bosch product was developed and manufactured with high-quality material and
components that can be recycled and reused. This symbol means that electronic and electrical appli-
ances, which have reached the end of their working life, must be collected and disposed of sepa-
rately from household waste material. Separate collecting systems are usually in place for disused
electronic and electrical products. Please dispose of these units at an environmentally compatible
recycling facility, per European Directive 2002/96/EC.
Environmental statement - Bosch has a strong commitment towards the environment. This unit has
been designed to respect the environment as much as possible.
Electrostatic-sensitive device - Use proper CMOS/MOS-FET handling precautions to avoid electro-
static discharge.
NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when han-
dling the electrostatic-sensitive printed circuit boards.
Fuse rating - For security protection of the device, the branch circuit protection must be secured
with a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC Section 60).
Grounding and polarization - This unit may be equipped with a polarized alternating current line plug
(a plug with one blade wider than the other blade). This safety feature allows the plug to fit into
the power outlet in only one way. If unable to insert the plug fully into the outlet, contact a locally
certified electrician to replace the obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
Alternately, this unit may be equipped with a 3-pole grounding plug (a plug with a third pin for earth
grounding). This safety feature allows the plug to fit into a grounded power outlet only. If unable to
insert the plug into the outlet, contact a locally certified electrician to replace the obsolete outlet.
Do not defeat the safety purpose of the grounding plug.