Filter
Top Products
28 en | Connections and settings Digital Video Recorder
F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
3.14.2 Monitor B
You can select the live screen mode to full or 4-view screens on the monitor B.
1. Press B (
) button or click the icon in the system control bar.
The screen mode select menu of monitor B is displayed on the monitor A.
2. Select screen mode.
ab cde
Figure 3.10 The screen mode select menu of monitor B.
a Selected channel of the monitor B.
b Channel buttons: Press a 1 to 16 channel button to see the current camera image on the
monitor B.
c Screen mode
• Full Screen Mode: When you see the selected channel on the full screen.
• 4 view Mode: Displays 4 view screens on the monitor B.
d Selected view mode.
e Sequence: View all channels in sequence.
3. Select [OK (B)] and press ENTER to confi rm your selection.
Note:
On Monitor B output always the channel number (CH01 ... CH16) is
displayed. Camera name can only be displayed on Monitor A output.
3.15 PTZ camera control
You can control the cameras connected via the biphase port and data port RS-422/485 terminal. You
must set the configuration between the PTZ camera and the DVR.
1. Select the PTZ camera channel on monitor A you want to control.
2. Press PTZ or click the PTZ icon in the system control bar.
PTZ virtual remote control is displayed on monitor A.
3. Use each item to control the PTZ camera.