Filter
Top Products
42 en | Connections and settings Digital Video Recorder
F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
3.19.7 Motion recording
Settings concerning motion recording.
Figure 3.21 Motion recording setup menu
• Ch: Displays the channel number.
• Resolution: Selects the recording resolution.
• Quality: Selects the recording picture quality (Lowest, Low, Normal, High or Best).
• Frame rate: Selects the frame rate. The frame rate is the number of recorded frames per
second. According to resolution, the frame rate is set automatically. If you wish to set
manually, refer to the below table.
Resolution Frame rate
NTSC
352*240 1, 3, 5, 7.5, 15, 20, 30
704*240 1, 3, 5, 7.5, 15
704*480 1, 3, 5, 7.5
PAL
352*288 1, 3, 5, 6, 12.5, 20, 25
704*288 1, 3, 5, 6, 12.5
704*576 1, 3, 5, 6
Table 3.10 Frame rate table
• Pre-event: Specify the pre-event recording time that records the situation until motion has
been detected. (Off, 5, 10, 20, 30, 40, 50 sec or 1 min)
• Post-event: Specify the post-event recording time that records the situation after motion has
been detected. (10, 20, 30, 40, 50 sec or 1, 2, 3, 5, 10 min)
Note:
Pre-event times given are only a rough guide. Actual times are dependent
upon resolution, quality, and frame rate settings, as well as the number of
channels selected for pre-event recording.