Filter
Top Products
6
Setting up the Projector
The image exits the projector at a given angle. This image offset is
125.5% when the projector is in 16:9 mode (the default mode).
This means that if you have an image 10’ high, the bottom of the
image will be 2.55’ above the center of the lens.
The value is 113.7% for 4:3 mode.
F
IGURE
6
Projection angle in 16:9 mode
3 Make sure the projector is unplugged and your equipment is
turned off.
WARNING: Do not place the
projector on a tablecloth or other
soft covering that may block the
vents. Do not use a non-Studio
Experience ceiling mount. In the
unlikely event of the bulb
rupturing, thoroughly clean the
area in front of the projector and
discard any edible items placed in
that area
.
lens center
bottom of image
2.55’ above lens
10’ high
image