Filter
Top Products
32
Using the Projector
Zoom mode
This activates the zoom feature. When you press this button, the
zoom icon appears in the lower right corner of the screen. Press
the
zoom +
button to zoom in on part of the image, press the
zoom -
button to zoom out. When the image is zoomed, you can
use the up/down/left/right arrow buttons to display a different
part of the zoomed image (pan the image). Press
zoom mode
again to exit the mode and return the image to normal size.
You can also turn Zoom mode on using the Image menu and
zoom and pan the image using the keystone buttons and arrows
on the keypad. See page 42 for details.
Zoom +/- (remote only)
This allows you to zoom in and out on a part of the image.
Standby
When you press
standby
, the display and audio turn off and a
blank screen is displayed for 15 minutes. You can change the
amount of time the projector stays in standby mode; see page 45
for details. The LED lights amber while the projector is in
standby.
•
If you press
standby
again within 15 minutes, the projector
returns to normal operations immediately. The LED changes
from amber to green.
•
If you don’t press
standby
again, the lamp turns off after 15
minutes. The LED blinks amber and the fans run while the pro-
jector cools down, then the projector shuts off and the LED
lights solid green.
Volume (keypad only)
To increase the volume, press
volume + .
To decrease the vol-
ume, press
volume -
.