Filter
Top Products
14
Setting up the Projector
If your TV tuner has composite video output:
1 Plug the A/V cable’s round yellow connector into the com-
posite “video-out” connector on your tuner (Figure 14). This
connector may be labeled “To Monitor.”
2 Plug the other yellow connector into the yellow composite
connector (labeled video 2) on the projector.
F
IGURE
14
Connecting the projector to a TV tuner using the audio video (A/V) cable
3 If you want sound from the projector’s speakers, plug the A/
V cable’s white connector into the left “audio out” connector
on your tuner. Plug the cable’s red connector into the right
“audio out” connector on the tuner.
4 Plug the A/V cable’s other white connector into the white
“audio L” connector on the projector. Plug the cable’s other
red connector into the red “audio R” connector on the projec-
tor.
5 Follow steps 5-8 starting on page 12.
If your TV tuner has component video output:
Connect the component cable (not included) to the appropriate
connectors (labeled video 3) on the projector and on your tuner.
Your local electronics store should carry these cables.
A/V
cable