Filter
Top Products
18
Setting up the Projector
If your video device has composite video output:
1 Plug the A/V cable’s round yellow connector into the com-
posite “video-out” connector on your video device (Figure
17). This connector may be labeled “To Monitor.”
2 Plug the other yellow connector into the yellow composite
connector (labeled video 2) on the projector.
F
IGURE
17
Connecting the projector to a video player using the audio video (A/V) cable
3 If you want sound from the projector’s speaker, plug the A/V
cable’s white connector into the left “audio out” connector on
your video device. Plug the cable’s red connector into the
right “audio out” connector on the video device.
4 Plug the A/V cable’s other white connector into the white
“audio L” connector on the projector. Plug the cable’s other
red connector into the red “audio R” connector on the projec-
tor.
5 Follow steps 5-10 starting on page 16.
composite video
cable