Filter
Top Products
7. Setup
103
7-6.9. Recording by Motion Detection
When the menu of motion is properly set up (See section 7-6.3 for all the channels and
this section for each of the channels) and detected motion of objects, the system begins
recording automatically. The recording icon on the MENU bar should be selected in this
recording mode. If not, it won’t be recording.
▫ Click the mouse on the
button for each of the channels in the RECORD menu,
then the MOTION menu will be displayed on the screen as shown in Fig.7-68.
▫ Click the
(EXIT) button to return to the RECORD menu.
▫ ON/OFF
The system will start recording when MOTION is detected and the ON is selected in the
MOTION menu by clicking the mouse. If the OFF is selected, the system won’t be
recording.
[Fig.7-69 MOTION ON/OFF button]
[Fig.7-68 MOTION menu]