Filter
Top Products
7. Setup
105
▫ Spot Setup
If the “ON” is selected by clicking the mouse on the SPOT button in the MOTION menu, a
full screen will display when a motion is detected. If the “OFF” is selected, the full screen
won’t be displayed even though motion of objects is detected.
▫ Region
The Motion Detection Area displays in blue on the screen, and it turns to yellow color when
the motion is detected. The white color on the screen represents none of detection area.
There are three kinds of REGION settings as follows.
By All Set
Click the ALL SET button in the MOTION menu on each of the cameras, then the Motion
Detection Area displays in blue on the screen as shown in Fig.7-75. Right-click on the blue
screen to return to the MOTION menu. The factory default value is the ALL SET.
[Fig.7-74 ALL SET button]
[Fig.7-73 Spot Setup button]
[Fig.7-75 All Set screen]