Filter
Top Products
6. How to Operate
53
6-8. Record
This system provides Watchdog function.
When power goes off during recording and then the power turns on, the system will automatically
start recording.
6-8.1. Manual (Continuous) recording
▫ Click the SETUP icon on the MENU bar in the LIVE mode.
▫ Click the RECORD button in the SETUP menu and then the RECORD window will be
displayed.
▫ Select the MANUAL RECORDING (
) between the MANUAL RECORDING ( )
and the TIMER RECORDING (
) as shown in Fig.6-23. All channels can be set at
the same time by clicking the ALL (
) or each of the channels can be set by
clicking the MANUAL RECORDING (
) on the CAM 1 through CAM 16.
The MOTION (
) and SENSOR ( ) as shown in Fig.6-23 should be turned OFF
in this recording mode.
▫ Press the RECORD button on the remote controller or click the RECORD icon on the
MENU bar.
6-8.2. Manual Event Recording
▫ Click the SETUP icon on the MENU bar in the LIVE mode.
▫ Click the RECORD button in the SETUP menu and then the RECORD window will be
displayed.
▫ Select the MANUAL RECORDING (
) between the MANUAL RECORDING ( )
and the TIMER RECORDING (
) as shown in Fig.6-24. All channels can be set at
the same time by clicking the ALL (
) or each of the channels can be set by
clicking the MANUAL RECORDING (
) on the CAM 1 through CAM 16.
[Fig.6-23. Manual Recording setup]