Filter
Top Products
Stand-alone DVR Instruction Manual
78
7-2.2.
SYSTEM CONFIG
▫ Click the “SYSTEM CONFIG” button in the SYSTEM menu, and then the SYSTEM
CONFIG menu will be displayed (See Fig.7-10).
▫ Click the “EXIT” button to return to the SYSTEM menu.
7-2.2.1. FACTORY DEFAULT
▫ Click the “FACTORY DEFAULT” button in the SYSTEM CONFIG menu, and you will be
asked as shown in Fig.7-12.
▫ Click the “OK” button in Fig.7-12 to reset to the Factory Default Values, and then the
system will save the factory default values (settings).
Click the CANCEL button to cancel.
[Fig.7-11 Factory Default button]
[Fig.7-10 SYSTEM CONFIG]