Filter
Top Products
5. Installation
25
5-4. Installation
5-4.1. Camera Connection
▫ Connection of 6pin MINI DIN Cameras
Connect the supplied cameras to the Camera Input (6pin mini DIN jack) on the back of the
system as shown in [Fig. 5-2 Rear View].
▫ Connection of BNC Cameras
Connect the BNC cameras (not included) to the Camera Input (BNC connector) on the back
of the system as shown in [Fig. 5-2 Rear View].
5-4.2. Installation of the Monitor
[Fig. 5-4-1 Releasing the Lever] [Fig. 5-4-2 Locking the Lever]
▫ Desktop
- Pull the Lever to the left as shown in
[Fig.5-4-1] and move the panel forward or backward until
getting the proper angle of panel (screen) for viewing.
- Release the Lever and push it to the right as shown in
[Fig.5-4-2] for locking the mounting
bracket.
▫ Installation of the system on the wall
- Remove the screw cover on the top of the mounting bracket.
- Place the system on the flat surface with soft fabric and set the proper angle of panel