15
HDTV
HDTV
3.
Press the PREV button to return to the SETUP menu.
4.
Use the up/down arrow buttons to highlight Channel Setup
and then press the SEL button.
The CHANNEL SETUP menu is displayed.
5.
Use the up/down arrow buttons to highlight Channel
Scanning and then press the SEL button.
The CHANNEL SCANNING menu is displayed.
To scan the channels into the HDTV memory
• If Yes is highlighted,press the SEL button to begin channel
scanning.
• If No is highlighted, use the up/down arrow buttons to
highlight Yes and then press SEL to begin channel scanning.
The HDTV will scan the channels and memorize all channels it
can receive.
When the channel scan is finished, press the MENU button
until the menus disappear from the screen, or press the PREV
button to select another menu option.
To exit the menu without scanning the channels
• If Yes is highlighted,use the up/down arrow buttons to
highlight No and then press the SEL button to return to the
previous menu.
• If No is highlighted, press the SEL button to return to the
previous menu.
❑ NOTE: Whenever you change the input source (Antenna or
Antenna + Cable) from the INPUT SELECT menu, you
should scan the channels again.
