Filter
Top Products
16
HDTV
HDTV
Adding/erasing channels
You can easily add or erase channels that your HDTV memorized.
To do this:
1.
From the MAIN MENU highlight SETUP and press the SEL button.
2.
Highlight Channel Setup and press the SEL button.
3.
Highlight Add/Erase Channel. Press the SEL button.
4.
You will see a screen that asks you whether you wish to add
or erase a channel. If you want to add/erase a channel, press
the SEL button after highlighting Yes.
5.
You will see the pop-up menu.
• If a channel is memorized, the menu asks you whether
you wish to erase it or not.
Press the SEL button after highlighting Yes if you want to
erase a channel.
• If a channel is not memorized, the menu asks you
whether you wish to add it or not.
Press the SEL button after highlighting Yes if you want to
add a channel.
When finished, press the MENU button until the menus
disappear from the screen, or press the PREV button to select
another menu option.
6.
You can also use the ADD/ERASE button on your remote
control to add/erase channels.After selecting the channel to
add or erase using the Number buttons, press the ADD/ERASE
button on your remote control.You will see the pop-up menu.
• If a channel is memorized, the menu asks you whether
you wish to erase it or not. Press the SEL button after
highlighting Yes if you want to erase a channel.
• If a channel is not memorized, the menu asks you
whether you wish to add or not. Press the SEL button after
highlighting Yes if you want to add a channel.
SETUP
• Input Select
• Channel Setup
• Time Setting
• Digital Audio
• Speaker Setup
• Factory Setting
• HD Component Input
Select one of the
setup options.
Move
SEL
Select
CHANNEL
SETUP
• Check Signal Strength
• Channel Scanning
• Add/Erase Channel
• Fine Tuning
Select one of the
channel options.
Move
SEL
Select
ADD/ERASE
CHANNEL
Do you want to add/erase this channel?
• Yes • No
• Yes • No
Do you want to erase
current channel in your
channel map?
You can add the
new channel or
erase unwanted
channel.
Move
SEL
Select