Filter
Top Products
38
Using the Menus without the Remote Control
You can use the menus from the top panel controls of the HDTV,
much like you use them from the remote control.The top panel
controls operate slightly differently.
The differences are:
• The top panel controls have no PREV button.Therefore you
cannot back up from one menu to the previous menu.
• Use the up/down CH buttons like the up/down arrow buttons
on the remote control.
• Use the left/right VOL buttons like the left/right arrow buttons
on the remote control.
• Use the SELECT button on the top panel, just like the SEL
button on the remote control.
Factory Settings
The Factory Settings menu is to reset the system to the default
factory setting state.
1.
From the Main Menu,ust the up/down buttons to highlight
SETUP and press the SEL button.
The SETUP menu is displayed.
2.
Use the up/down buttons to highlight FACTORY SETTING and
press the SEL button.
The FACTORY SETTING menu is displayed.
3.
Highlight Reset defaults using the left/right buttons.
4.
Press the SEL button.
Your HDTV shall reset to the factory default settings.
5.
Press the Power button to restart.
SELECT MENU
FACTORY
SETTING
Select reset to
erase all
CAUTION :
Reset defaults
This will reset your system to the
factory settings.
Cancel