22
HDTV
HDTV
Setting up digital audio
You can set the HDTV to automatically adjust to play the kind of digital audio that you connected.
To do this:
1.
From the MAIN MENU, use the up/down arrow buttons to
highlight SETUP. Press the SEL button.
2.
From the SETUP menu,use the up/down arrow buttons to
highlight Digital Audio. Press the SEL button. If you connected:
• the video outputs of equipment to the High
Definition video inputs on the rear panel
Use the up/down arrow buttons to select whether you
connected the audio outputs of your equipment to the
optical, coaxial, or component audio inputs on the rear
panel. Press the SEL button.
• the video outputs of equipment to the Video 1 inputs
on the rear panel
Use the up/down arrow buttons to select whether you
connected the audio outputs of your equipment to the
optical, coaxial, or RCA (Analog L,R) audio inputs on the
rear panel. Press the SEL button.
• the audio inputs of equipment to the Digital Audio
Output terminals
Use the up/down arrow buttons to select whether the output
format of audio is Dolby Digital or PCM. Press the SEL button.
Selecting surround sound
You can use the HDTV menus to choose different kinds of
surround sound, or to hear regular stereo.
To do this:
1.
From the MAIN MENU, use the up/down arrow buttons to
highlight AUDIO. Press the SEL button.
2.
From the AUDIO menu, use the up/down arrow buttons to
highlight Listening Mode. Press the SEL button.
Use the up/down arrow buttons to highlight one of the
following settings. Once selected, press the SEL button, then
the PREV button to return to the AUDIO menu.
DIGITAL
AUDIO
HD Input Audio Select
• Optical
• Coaxial
• Optical
• Coaxial
• Component
Video 1 Input Audio Select
• RCA (Analog L, R)
Digital 1 Audio Output Format
• Dolby Digital
• PCM
Select the
input/output
format of the
audio jacks on
the rear panel.
Move
SEL
Select
SEL
Select
LISTENING
MODE
Select one of the
listening modes.
Move
• Dolby Surround (L, R, C, Ls, Rs)
• 3 Stereo (L, R, C)
• Phantom Center (L, R, Ls, Rs)
• Stereo (L, R)