Filter
Top Products
QR404 User Manual
25
(Picture 46)
(Picture 49) (Picture 50)
(Picture 47)
(Picture 48)
When accessing your DVR from a mobile phone using a Symbian operating system, follow these steps:
1. First you need to copy the “QQeye.CAB” file included on the Setup CD disk to your mobile phone. There are
two different ways you can do this:
a. You can copy the file from the installation CD to your computer. Once you do this, you
can then transfer that file from your computer to your phone’s memory card using a
memory card reader that is connected directly to your computer.
b. You can copy the file from the installation CD to your computer and then use a
Bluetooth connection to send this file to your phone’s Inbox (Picture 46).
2. Once you have copied the QQeye program to your phone, you can then click on it to begin the installation
process (Picture 47). Once the installation process has been initiated, you will receive a prompt asking you if
you would like to install the QQEye program (Picture 48). Click the Yes button on the lower left hand side of
the prompt and continue the installation process as instructed.
3. When prompted for an install location as illustrated in Picture 49, choose “Phone Memory” by clicking on it
and hitting the Select button on the lower left hand side of the prompt screen. You will then receive an
installation status screen and an “Installation Complete” message (Picture 50) on your screen once the
installation process is complete.
4. After you have installed the software to your mobile phone, you can then go to the Applications folder of your
phone and select the “QQEye” Program as shown in Picture 51. Click on Open at the bottom of your screen
and the settings menu will appear as illustrated in Picture 52. Click the Done button at the bottom of that
screen and you will then see an image of your live video feed appear as illustrated in Picture 53.
Open
(Picture 51)
(Picture 52)
(Picture 53)