Filter
Top Products
User Manual for Commercial Series Net DVR
Page 33 Total 121
4.5 Manual Record
Note: The user must have the corresponding right, DVR must have HDD and HDD must be
formatted.
Manual record
In preview mode, press【REC】key, in the pop-up login dialog, select the name and input the
correct password, you can then enter into the “Manual Record” interface.
In menu mode, press【REC】key to enter into “Manual Record” interface directly.
Description
Manual record interface has following parts: channel number, channel status, start/stop record,
start all and stop all buttons.
Channel: Lists the channel numbers that the DVR has.
Status: Channel work status has 4 cases:
means idle. Green means the channel is
recording (including real time recording, alarm recording, motion detection recording). Red means
network tramsmission. Orange means both recording and network transmission.
Start/Stop: “ü” means you can start corresponding channel recording. “×” menas you can
stop recording.
Start All: Press this button to start all channels recording.
Stop All: Press this button to stop all channels recording.
Exit manual record
Press【ESC】key to enter into preview mode. Press【MENU】key to enter into main menu.