Filter
Top Products
User Manual for Commercial Series Net DVR
Page 63 Total 121
Step 6: Alarm schedule setup: When a view tampering alarm occurs, the DVR will handle
the alarm based on the schedule. You can set 4 periods for each day one week. Also you can copy
the schedule of one day to other days.
Notes: Time periods can not be repeated. Please reboot the DVR to make the setting
effective.
Step 7: Setup alarm policy: If a view tampering alarm occurs during a schedule, the DVR
will response based on the policy. You can select one or more solutions including “On Screen
Warning”, “Audible Warning”, “Upload to Center” and “Trigger Alarm Output”. You can use 【↑】
【↓】and 【EDIT】key to enable or disable them. “×” is disabled and “ü” is enabled.
Step 8: Save alarm setup: After you setup, press “Confirm” button and return to “Image
Setup” interface. In “Image Setup” menu, press “Confirm” button to save current camera
parameters and return to main menu.
Step 9: Save all cameras: If you want to setup other cameras, please repeat from step 2 to
step 8. In “Image Setup” menu, press “Confirm” key to save all cameras parameters. Press
“Cancel” button or【ESC】key to abort.
Select “Off” option for “View Tampering”, you can delete the view tampering area.
Note: Only one view tampering area can be setup for each camera. The view tampering area
can not be copied. If the schedule is modified, you must reboot the DVR to make the parameters
effective.