Filter
Top Products
User Manual for Commercial Series Net DVR
Page 80 Total 121
number, DVR current IP to that fixed IP address. We call that fixed Internet IP as DNS IP. The
DNS server with that fixed Internet IP can receive DVR information and used to provide DVR
with a dynamic IP address.
This DNS is special software, not the normal domain name server. You can use SDK to
develop this DNS software (available on request).
Multicast IP: It is one D-class IP address, among 224.0.0.0 --- 239.255.255.255. If you do
not use multicast function, you do not need to set. Some routers will prohibit multicast function in
case of network storm.
Remote Host IP and Port: If you set this IP and port, when there is alarm and exception
happens, the DVR will send information to that host IP. The center with this IP can receive alarm
and exception information from DVR. You can use SDK to develop this center software (available
on request).
NAS: Network access storage. DVR will regard network HDD as local HDD. If you enable
this function, DVR will send and save the real time image to that network HDD.
NFS IP: The IP of that network storage server.
Dir: The directory name shared by that network storage server.
This function is not currently available.
HttpPort: The port is for IE browser. The default value is 80. It can be modified.
PPPoE: DVR supports PPPoE dail-up function.
Example: Use PPPoE function
Step 1: Enter into “Network” menu.
Step 2: Select NIC type.
Step 3: Input port number. In the port edit box, use numeric keys to input port number. The
port number must be more than 2000.
Step 4: Input DNS IP. Input one fixed Internet IP address where the IP analyst software
(IPServer) is run.
Step 5: Input PPPoE parameters. Use【ENTER】or【EDIT】key to enable PPPoE function
(set PPPoE flag as “√”). Input PPPoE username, password and verify password that ISP provided.
Step 6: Save parameters. In “Network” menu, press “Confirm” to save parameters. Reboot
DVR to make parameters effective. In reboot process, DVR will start dialup using PPPoE function.
If DVR dials up internet successfully, DVR will display the dynamic internet IP address in
“Network” menu.