Filter
Top Products
User Manual for Commercial Series Net DVR
Page 48 Total 121
5.4 Main or Aux output to control PTZ
You can press 【Main/Aux】 button to enter into “Main” or “Aux” output control mode and
press 【PTZ】button to control one PTZ.
Please note if you enter into “PTZ” control mode, 【Main/Aux】button is not effective until
you press 【ESC】button to exit PTZ control mode.
Only the users that have “Parameters Setup” right need read this chapter. When the following
parameters are modified and saved, you must reboot the DVR to make the new parameters
effective. Other parameters do not require you to reboot.