Filter
Top Products
User Manual for Commercial Series Net DVR
Page 78 Total 121
Minutes, 5 Minutes, 10 Minutes and Manual Stop. If you select “Manual’ option, the alarm output
will not stop until you press the “Clear Alarm” button in “Utilities” menu. So the actual alarm
output time is made up of alarm input time and this delay time.
Step 3: Enter into alarm out schedule
You can set the schedule to make alarm output effective. Move “Active Frame” to
“Schedule” button on right side of “Alarm Out Time” item, press【ENTER】key to enter into the
corresponding schedule menu:
Step 4: Setup alarm out schedule
Like other schedule setup, you can set 4 time periods for one day and 7 days for one week.
When you finish setup, press “Confirm” button to return to “Alarms” menu.
Step 5: Copy one alarm output parameters to other alarm outputs
In “Alarms” menu, you can copy parameters of current alarm output to other alarm outputs.
Step 6: Save setup
When you finish setup, in “Alarms” menu, press “Confirm” button to save all parameters.
Note: If any schedule is modified, you must reboot DVR to make it effective.