Filter
Top Products
Page 52
Chapter 3
Using the System
To Turn the Caller ID On and Off
1. Press MENU.
2. Select the System Setup option.
3. Select the
Installation option.
4. Select the Caller ID option. The following screen will
display.
5. Highlight Enable Caller ID or Disable Caller ID and press
the SELECT button.
6. Select Save.
Resetting to Factory Defaults
Use these instructions if you want to reset the receiver to be the same as
when it was shipped.
Note
: Resetting the receiver discards all Favorites Lists except the All
Chan and
All Sub lists.
Note: If you have set any locks on the receiver, and the receiver is locked,
these locks will be kept. If the receiver is unlocked, any such locks will be
lost. You cannot reset the receiver to factory default settings to discard a
password you have forgotten. Only the Customer Service Center can reset
the receiver to bypass a receiver lock.
1. Press the
MENU button.