Filter
Top Products
LC-XC1
28
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
IMAGE and press the SELECT button. Another dialog box
IMAGE MENU will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the function that you want to
select and then press SELECT button.
Normal picture level preset on this projector. This picture level
can be set by pressing the NORMAL button.
Picture level adjusted for the picture with fine tone.
Picture level adjusted manually in the custom setting dialog
box.
When selecting “
"
,” the custom setting dialog box will
appear. Move the arrow to the item that you want to
change by pressing the POINT UP/DOWN button, and
adjust each value by pressing the SELECT
button to match
with the image.
Adjust the picture as necessary to eliminate flicker trom
the display. (From 0 to 127.)
The number of the total dots in one horizontal period. Adjust the
number to match your PC image.
Move the arrow to the color that you want to adjust. Point
to
"
to
lighten the color and select ! to deepen the color.
(From 0 to 63.)
Point to " to decrease contrast, and select ! to increase
contrast. (From 0 to 63.)
Point to "to adjust the image darker, and select ! to adjust
brighter. (From 0 to 63.)
Point to " to soften the image, and select ! to sharpen the
image (From 0 to 15.)
Each of the keys operates as follow.
Reset
Recalls the data previously adjusted.
Stored
Stores the adjusted data in the memory.
Quit
Closes IMAGE MENU.
NOTE: The Fine sync and the Total dots
cannot
be operated when the input signal
is from the COMPUTER INPUT-i
(DIGITAL) terminal or “RGB” is selected
on SYSTEM MENU (P24 and 25).
The Fine sync and the Total dots cannot
be fully adjusted when “HDTV1O35i” or
“HDTV1O8Oi” is selected on SYSTEM
MENU (P24 and 25).