Filter
Top Products
LC-XC1
34
1 Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
IMAGE and press the SELECT button. Another dialog box
IMAGE MENU will appear.
2 Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the function that you want to
select and then press SELECT button
.
Standard
Normal picture level preset on this projector. This picture level
can be set by pressing the NORMAL button.
Cinema
Picture level adjusted for the picture with fine tone.
Custom
Picture level adjusted manually in the custom setting dialog box
When selecting “",” the custom setting dialog box will appear.
Move the arrow to the item that you want to change by pressing
the POINT UP/DOWN button, and adjust each value or change
the setting On or Off by pressing the SELECT button to match
with the image.
Color
Point to V button to lighten the image, and select A to
deepen
image. (From 0 to 63.)
Tint
Point to V button to increase purple, and select A to increase
gre~ (From 0 to 63.)
White balance (Red I
Green
I Blue)
Move the arrow to the color that you want to adjust. Point
to V
lighten the color and select A to deepen the color. (From 0
to 63.)
Contrast
Point to V button to decrease contrast, and select A to increa
contrast. (From 0 to 63.)
Brightness
Point to V button to darken the image, and select A to brighten
image. (From 0 to 63.)
Sharpness
Point to V button to soften the image, and select A to
sharpen image. (From 0 to 31.)
Noise reduction
Set “On” to reduce the noise (rough parts) of the image.
Progressive
Set “On” to provide progressive scan mode.
Each of the keys operates as follow.
Reset Reca
lls the data previously adjusted.
Stored
....
Stores the data in the memory.
Quit
. .
Closes IMAGE MENU.
NOTE : The Noise Reduction
cannot be operated
when the video
signal
is
from the Y, Pb/Cb, Pr/Cr
jacks.
The Progressive cannot be operated
when “480p,” “575p,” “720p,” “1 035i,”
“1 080i-50” or “iO8Oi-60” is selected
on SYSTEM MENU (P33).