Filter
Top Products
LC-XC1
32
DIRECT OPERATION
Select VIDEO mode by pressing the MODE button on the
Top
Control or the VIDEO button on the Remote Control Unit.
MENU OPERATION
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select Video
and press the SELECT button.
This projector automatically detects the signal from the
VIDEO INPUT JACK(s) or the S-VIDEO INPUT JACK.
When those jacks are connected at the same time, select
the type of Video source in VIDEO SOURCE MENU.
1
Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select
VIDEO SOURCE and press the SELECT button. Another
dialog box
VIDEO SOURCE MENU
will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the source that you want to
select, and then press the SELECT button.
Auto
The projector automatically detects the incoming Video source,
and adjusts itself to optimize its
performance.
• When both VIDEO jack and S-VIDEO jack are connected, the
5-
VIDEO jack has priority over the VIDEO jack.
• When both Y-Pb/Cb-Pr/Cr jacks and S-VIDEO
jack are
connected, the Y-Pb/Cb-Pr/Cr jacks have priority over the S-VIDEO jack.
Video
I
S-Video /
Y, PbICb, Pr/Cr
When the VIDEO INPUT JACK(s) and the S-VIDEO INPUT JACK are connected at the same time, or if the projector
cannot chose the proper video source, it
is necessary to select a specific video source among Video, S-Video
and Y, Pb/Cb, Pr/Cr.